Zynq UltraScale MPSoC Base TRD 2017.1 - Design Module 1

Zynq UltraScale MPSoC Base TRD 2017.1 - Design Module 1

Return to the Design Tutorials Overview.



Design Overview


This design module showcases the following:
  • Boot APU only
    • FSBL, ATF, U-boot, PMU-FW
    • APU OS: SMP Linux
  • Ethernet via FTP/SCP
  • Serial console via UART0
  • File system via SD, USB or SATA
  • Standard Linux applications on rootfs





Design Components


  • petalinux_bsp
    • zynqmp_fsbl
    • pmu_fw
    • bl31
    • u-boot
    • kernel
    • device tree
    • rootfs



Build Flow Tutorials


Petalinux BSP


This tutorial shows how to build the Linux image and boot image using the PetaLinux build tool.

  • Configure the PetaLinux project.
    % cd $TRD_HOME/apu/petalinux_bsp
    % petalinux-config --get-hw-description=./hw-description --oldconfig
  • Select the device-tree matching design module 5 and build all Linux image components
    % cd project-spec/meta-user/recipes-bsp/device-tree/files/
    % cp system-dm1.dts system-user.dtsi
    % petalinux-build
    % cd -
  • Create a boot image.
    % cd images/linux
    % petalinux-package --boot --bif=dm1.bif --force
  • Copy the generated boot image and Linux image to the dm1 SD card directory.
    % mkdir -p $TRD_HOME/images/dm1
    % cp BOOT.BIN image.ub $TRD_HOME/images/dm1



Run Flow Tutorial


  • See here for board setup instructions.
  • Copy all the files from the $TRD_HOME/images/dm1 SD card directory to a FAT formatted SD card.
  • Power on the board to boot the images; make sure all power rail LEDs are lit green.
  • The user can now see the linux-boot on the serial console:
  • Upon completion of the linux-boot, use the below login and password to log into the framebuffer or serial console:
    root@Xilinx-ZCU102-2017_1 login: root
    password: root
  • The SD card file system is mounted at /media/card



References


© Copyright 2019 - 2022 Xilinx Inc. Privacy Policy