This page will cover how to bring up ZCU102, ZC702, and Zed board using pre-images.

Pre-requisites

  1. You should have a SD card with a valid boot partition. Refer this article to set up your SD card.

ZCU102

Make sure SW6 configuration is as shown in the image:
102-sd-boot.png
switch configuration for SD boot


For ZCU102, you will need to copy the below files on to your SD card boot partition:
  1. BOOT.BIN
  2. image.ub

ZC702/ZC706

Make sure SW16 configuration is as shown in the image:
wiki_7.1_boot_mode_switch.jpg
switch configuration for SD boot

For ZC702/ZC706, you will need to copy below files on to your SD card boot partition:
  1. BOOT.BIN
  2. image.ub

Zed board

Make sure JP 7, 8, 9, 10, and 11 configuration is as shown in the image:
zed.png
For Zed board, you will need to copy below files on to your SD card boot partition:

  1. BOOT.BIN
  2. image.ub

Related Links